OPPO NETWORK UNLOCK CODE FREE

OPPO NETWORK UNLOCK CODE FREE FOR ALL , 16DIGIT CODE FREE FOR ALL




A37.f1s ALL ....*#3988691#

F1 *#3982591#

F1+ *#3988012#

A33 *#39832091#

R5 *#3988341251#

OP FIND 5 *#392102191#

OPPO JOY *#302121691#

OPPO S7 *#39802121451#

OPPO NEW *#398065654691#

Oppo F3 Plus Unlock Bootloader Tutorial

To unlock the boot loader on your Oppo F3 Plus you need to have the ADT with all the packages installed and configured. Download ADT with all the packages from this link : http://developer.android.com/sdk/index.html

Later once the configuration is done properly then you can connect your device and enable USB Debugging under the options.

1. Download Modaco Superboot file for Oppo F3 Plus from this link : http://downloadsafe.org/file/36C8b8 , and save them to your computer.

Tutorial Video : Easy Way To Download file = http://www.recoverycwm.com/video/videol.html

2. Once downloaded, extract it by right clicking and extract all.

3. On your device, click on Settings > Developer Options > Turn USB Debugging On.

4. Plug the device in to your computer via USB cable.

5. Open the superboot folder that we just extracted (until you see the folder with fastboot-windows inside it), then hold the shift key down on your computer and right click any blank area.

6. Now, select open command window here.

7. In the command prompt, type the following with hitting enter at the end of each line.

adb-windows reboot bootloader (and wait for the device to reboot) fastboot-windows oem unlock *If it gets stuck at waiting for device here, download and install PDANet on your computer, once installed, unplug then plug the device back in and see if that fixes it.

Once it runs the device should display a screen asking you if you are sure. Click yes using the volume buttons. The device will go back to the bootloader screen but say unlocked at the bottom.

Source

3UTool An all-in-one Tool for iOS Devices

The Most Efficient iOS Files & Data Management

 

3uTools makes it so easy to manage apps, photos, music, ringtones, videos and other multimedia files.

Fully view iOS device' s different statuses, including activation, jailbreak,

battery and iCloud lock statuses, as well as detailed iOS & iDevice information.

Download Here

 

How to Use Cydia Eraser to Un-jailbreak Your iDevice?

If you’re ready to un-jailbreak your iOS 7.1- iOS 9.3.3 device, you can follow these steps:

You are suggested to back up your important data for your iDevice before using Cydia Eraser, you can back up in 3uTools. Run 3uTools, click "Toolbox", find backup iDevice.

1) Download and install Cydia Eraserfrom Cydia.




2) Launch Cydia Eraser from the Home screen.


3) Tap on the red erase all data, unjailbreak device button at the bottom of the app.

3) When you get the confirmation prompt below, tap on the blue "Erase All button".



4) Cydia Eraser will begin doing its thing. Depending on how loaded your device is with files and jailbreak add-ons, this could take a bit. For our partially-stock jailbroken device, this process took about 5 minutes.

5) Keep an eye on the progress bar at the bottom of the display, as it will continue to keep you updated on the progress of the process:

6) When Cydia Eraser finishes its thing, you’ll see a black screen with a loading bar, and shortly after, a black screen with an Apple and a loading bar. This is iOS simply setting things up so you can activate your device.

7) When finished, you should see the “Hello” screen. Just follow the steps you see on the screen to set up and activate your device.

8) And just to confirm that you’re on iOS 9.3.3 after using Cydia Eraser, head over to Settings > General > About and you’ll see that your device was restored to iOS 9.3.3.

Bypass FRP for Huawei P9, P10 (Android 7)NEW_METHOD

Follow the Instructions:




1. Insert SIM card in handset and select EMERGENCY CALL.

2. The machine will switch to the calling interface, press * # * # 6130 # * # * will automatically switch to Testing screen

3. Select Phone infomation , select Sim 1 (or Sim 2 , depending on which sim you inserted in the slot)
Click on the 3 END button in the upper right corner, select View SIM address book
Click on 3 RIGHT in the upper right corner, select Add SIM contact, select Cannel and click the back arrow (upper left corner) to return to the Contacts interface.

4. Add a new contact by clicking on the plus symbol (+).

5. Enter the name and email in the right order (name and email are optional) and select the blue V tick icon in the upper right corner.

6. The machine will switch to the interface of the new saved contacts , select Email , select open with Gmail with Always (ALWAYS)

7. Select the following order. Skip> Add an email address, where you have an account, then select that account (eg Yahoo, Hotmail, ...), note not select Google (or Gmail)
Login to the account you have prepared
After login, we choose TAKE ME TO GMAIL
Type a few words into the body of the mail, highlight the phrase and select Assist, then No No
Type Chrome to open the Chrome app

8.On Chrome , go to https://vnrom.net/bypass and download the Settings.apk app

9. When the download is complete it will jump to the message Open (Open) below, quickly select Open (Open) to install the application always. (In case you can not keep up, you can reload the Settings.apk file is okay)

10. Install the application is always open to enter the Settings interface
At the Settings > pull down menu, select About phone, tap 7 times in Build number to open Developer options, turn on Enable OEM unlock
Back to Settings , select Advanced Settings> Backup & reset.
Perform factory reset and wait for the Phone to BOOT UP AS NORMAL

Watch the video below for easy way..

https://youtu.be/ijhV9VlYoYc

 

This procedure credit to the owner.

How to Root Galaxy S8 and S8 + (Exynos Chip)

Supported model:

Galaxy S8
SM-G950F
SM-G950FD
SM-G950L
SM-G950N
Galaxy S8 +
SM-G955F
SM-G955FD
SM-G955L
SM-G955N

Download TWRP for Galaxy S8

Download TWRP for Galaxy S8+

Download Root File Here

 

Procedure :

1.Activate developer mode by tapping 5 times on the Build number in Settings -> Device Information
Activate Oem Unlock.
2.Download the Root Magisk file in the link Above.
3.Copy Magisk Root and put it into internal memory.
4.Download TWRP for Galaxy S8 or S8 +.
5.Proceed to Download Mode by turning it off and then holding down the 3 keys. Source + Home + Vol (-) -> Select Continues.
6.Open Odin to select AP and path to twrp .tar file.
7.Click Start to start the flash.
8. Put in  recovery mode by turning it off and holding down the 3 power keys. Power + Home + Vol (+).
9.In TWRP you choose Install, select the Magisk file to install.
10.The installation process is over, select reboot system to reboot.

TWRP for Galaxy S8 (Exynos)

Guides:

Notice: It may wipe all your data including those in internal storage.

Part 1 - HOW-TO FLASH TWRP:
1. In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
2. Go to Settings -> Developer options and enable OEM Unlock option.
3. Download and Install Samsung Mobile Phones Drivers.
- Option 1: Download and Install Smart Switch for PC.
- Option 2: Download and Install standalone driver package.
4. Download and extract Odin (Samsung's Flash Tool) to your computer.
5. Download a .tar image of TWRP.
6. Reboot your device to download mode.
- Hold [VOLUME DOWN] + [BIXBY] + [POWER] for approx. 15 seconds.
- Read the warning carefully.
- If you agree, press [VOLUME UP] to get into Download mode. If you don't agree, STOP.
7. Open Odin and place that TWRP tar file in the [AP] slot.
8. Connect your phone.
9. Hold [VOLUME UP] + [BIXBY] + [POWER] on your phone and then press start on Odin.
10. Wait for the phone to reboot. DO NOT release [VOLUME UP] + [BIXBY] + [POWER] or you may not reboot into TWRP.

Part 2 - HOW-TO INITIALIZE TWRP: (for new phones)
1. If you completed Part 1 successfully, you should be in TWRP now. At this point, you will reach the screen asking you if you want to allow system modifications.
2. Select "Keep /system RO". (Don't swipe right or you may not be able to boot into system if you failed to complete next steps. However, you can swipe right to allow modifications if you are confident that you can complete next steps.)
3. Go to "Wipe" menu of TWRP and you will find "Format Data". Press "Format Data" and type "yes" to continue.
4. Go to "Reboot" menu and Press "Recovery" to reboot TWRP.
5. Download the latest dm-verity and force encryption disabler zip on your computer.
6. Transfer the zip to your phone.
- Option 1: MTP: Connect your phone with computer and just copy the zip to internal storage. (similar to how you transfer files when in system.)
- Option 2: ADB: Connect your phone with computer and run command "adb push /path/to/zip /sdcard/".
- Option 3: External SD: Copy the zip to an external SD and then insert the card to your phone.
7. Go to "Install" menu of TWRP and flash the zip.

TWRP is initialized and fully functional at this stage. Now you can either reboot into system or root, flash custom ROMs via TWRP.

Part 3 - HOW-TO ROOT:
1. Download the flashable zip.
- Option 1: Magisk
- Option 2: SuperSU (untested)
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.

Part 3a - HOW-TO FLASH CUSTOM ROMS:
1. Download the flashable zip.
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Simple.

Download: dreamlte (Exynos vaiants - G950F/FD/N/X)
https://twrp.me/devices/samsunggalaxys8.htmlSources:
https://github.com/TeamWin

Source Link

Magisk - Root & Universal Systemless Interface [Android 5.0+]

Magisk can ROOT your device, along with standard common patches.
It packs with a super powerful Universal Systemless Interface, allowing unlimited potential!

Magisk modifies boot image and add files to /data and /cache
It touches your /system partition only if root installed in /system is detected!

Features

• 100% fully open source and easy to build!


• Magic Mount:
  Allow you to do any system (vendor) modification without actually tampering the partitions.


• MagiskSU: Open Source Root Solution
  Root your device with MagiskSU, based on phh's Superuser, which is based on CM Superuser.


• Magisk Manager:
  MagiskSU Root Management, Install / Upgrade Magisk in-app,
  Manage, Upgrade, Download, Install Magisk Modules within a few taps.


• Magisk Hide:
  Hide Magisk from detection, including SafetyNet, which is used in Android Pay, Pokemon GO, Mario Run etc.


• Resetprop:
  Allow you to do any modifications to system props (build.prop), including read-only props.
  It is also used for tricking the bootloader state, and (for Samsung) the KNOX state


• Multiple Entry Points:
  Provide several entry points to developers, reliably pausing the boot process before everything is done.
  Include post-fs (cache) mode, which happens even earlier than data is mounted (used to replace Boot Animation etc.)


• Standard Stuffs:
  Remove dm-verity, forceencrypt; includes a super complete busybox to guarantee consistent behaviour, and can also be toggled to be used universally.

You are not forced to use MagiskSU if you're only aiming other features
However, the only other choice is systemless SuperSU
It will attempt to remove any other root, and install MagiskSU by default

Capability

• Anything that previously modifies /system can be loaded with Magisk. I ported Xposed and ViPER4Android just as an example.


• Use apps/features that uses Google's SafetyNet detection


• 100% systemless custom roms (take a look at our 100% Systemless Magisk ROM)


• (WIP) Universal Multirom for all Magisk supported devices (Proof Of Concept Video)

Installation Instructions
Before Magisk installs anything on your device, it will create a boot image backup in /data/stock_boot_<sha1>.img.gz
If anything goes wrong (e.g. bootloop), you can either use the uninstaller (recommended) or decompress the backup and manually restore your boot image
It should ALWAYS bring your device back to life (suppose you have a custom recovery that can decrypt your /data)

If you're already rooted with MagiskSU or Latest Official Systemless SuperSU

• Install/upgrade Magisk Manager from Play Store


• Install/upgrade Magisk as prompted in the application


• Reboot and you're done!!

If you're not rooted, or something went wrong and you need a clean start

• (Recommended) Restore your boot image back to stock (flash uninstaller if Magisk is previously installed)


• Download the latest Magisk zip file


• Reboot to a custom recovery


• If you choose to use SuperSU (only support Android 6.0+), flash SuperSU in systemless mode now


• Flash Magisk zip


• Reboot. Update the stub Magisk Manager to the latest from Play Store

Downloads

Latest Magisk
Latest Uninstaller (Support v1+)
Magisk Manager | (direct link)

Troubleshooting

FAQ:

• Q: I am losing root randomly!
  A: In some custom roms (known: LineageOS), enabling the Magisk busybox will make root unstable
  If you experience root loss issue, disable busybox in MagiskManager


• Q: Safety Net fails after enabling MagiskHide
  A: Magisk can only hide Magisk core features, for Magisk modules it depends on what the module does.
  If your ROM itself is not able to pass SafetyNet, then there is nothing Magisk can help.
  Your best bet is 100% stock ROMs, because your phone manufacturer is forced to release a device passing CTS.


• Q: My device is not supported!
  A: Please open an issue on Github, along with your boot image uploaded. No boot image, no fix.


• Sony Devices: If you're using stock kernel, it is using Sony's special ELF format.
  Magisk will repack it to standard AOSP format, which requires your device to be unlocked


• Some of the ASUS devices requires boot image signing, search the forums and sign them yourselves.

Currently Known Issues (v12.0):

• Pixel / Pixel XL: WIP


• Magisk Manager CANNOT be placed in adoptable storage, or superuser will not work


• MagiskSU does not support multiuser: WIP


• MagiskSU does not work on Android O preview: WIP

Source Link

 

How to make your own ADB Enabled File using FRP Hijacker

How to make your own ADB Enabled File or Combination file for Samsung Phones.

Download this first Click Me

Step 1. Open the FRP Hijacker, click the "SAM TOOL" then click the 3 dot to locate the file.


Step 2. Select the File you want.


Step 3. Click Create File


Step 4. Edit the File name then click SAVE.


Step 5. Creating Done.


Step 6. Look at the File


Thats it..